Rs Electricals Rs – 680c Aquarium 3 in 1 Power Head Top Filter ( 25 watts)Output: 1500L/H Power Aquarium Filter (Mechanical Filtration for Salt Water and Fresh Water)

Beskrivning

Model: RS-680C, Power: 25 W, Max. Flow: 1500L / H, Max. LIFT: 1.2m. Display: A clogged or dirty intake screen will perform a lot. If the pump is used on a dirty surface, increase it slightly to reduce the amount of debris contacting the intake, if low flow is desired, adjust the flow control level Maintenance: To clean the pump , Remove the front plate and impeller. Use a small brush or water vapor to remove any debris. Note: Ensure that the electrical cord loops under the electrical outlet to create a drip loop, this will prevent water from running the cord into the electrical outlet.Model: RS-680C, Power: 25 W, Max. Flow: 1500L / H, Max. LIFT: 1.2m. Display: A clogged or dirty intake screen will perform a lot. If the pump is used on a dirty surface, increase it slightly to reduce the amount of debris contacting the intake, if low flow is desired, adjust the flow control level Maintenance: To clean the pump , Remove the front plate and impeller. Use a small brush or water vapor to remove any debris. Note: Ensure that the electrical cord loops under the electrical outlet to create a drip loop, this will prevent water from running the cord into the electrical outlet.Model: RS-680C, Power: 25 W, Max. Flow: 1500L / H, Max. LIFT: 1.2m. Display: A clogged or dirty intake screen will perform a lot. If the pump is used on a dirty surface, increase it slightly to reduce the amount of debris contacting the intake, if low flow is desired, adjust the flow control level Maintenance: To clean the pump , Remove the front plate and impeller. Use a small brush or water vapor to remove any debris. Note: Ensure that the electrical cord loops under the electrical outlet to create a drip loop, this will prevent water from running the cord into the electrical outlet.Model: RS-680C, Power: 25 W, Max. Flow: 1500L / H, Max. LIFT: 1.2m. Display: A clogged or dirty intake screen will perform a lot. If the pump is used on a dirty surface, increase it slightly to reduce the amount of debris contacting the intake, if low flow is desired, adjust the flow control level Maintenance: To clean the pump , Remove the front plate and impeller. Use a small brush or water vapor to remove any debris. Note: Ensure that the electrical cord loops under the electrical outlet to create a drip loop, this will prevent water from running the cord into the electrical outlet.